|
Protect trailer boats and smaller yachts
When on land monitor for movement using the integrated detector. When on the water monitor for trespassers, break in and sinking. Add GPS for geo fence protection and exact location reporting.
Alarms
The 2 sensor inputs on the BlueRay Sting system are surge protected resistive loop circuits designed to operate with normally open and normally closed sensors. These can be passive sensors such as; reed switches, floor pressure mats and dinghy switch to protect hatches, doors, walkways and dinghies. , The system also supports active sensors such as motion detectors, proximity detectors, beam sensors and under deck/floor stress sensors to protect larger cabin spaces, deck areas and outdoor walkways.
Each alarm may be isolated individually. For example this allows a boat that is normally kept on a trailer to be put on a mooring by isolating the inertia sensor but leaving Geo-fence on.
Warnings
The Sting includes one warning input for bilge monitoring. The system also monitors the boats battery and will send warning messages if the boat battery voltage becomes low.
Messages
Alarm and warning messages are sent directly to the chosen mobile phones. Up to 4 mobile phones may be programmed into the system to receive messages. The system can operate with or without a monitoring service and therefore ongoing monitoring fees are not required unless a service is selected.
* BlueRay Sting system with standard wakeup periods. Note: Wakeup times and active sensors can increase power consumption.
|
